Haldar, A., and Ayyub, B.M., "Probabilistic Lateral Loading in Pressure Vessel Design," Symposium on Advances in Probabilistic Structural Mechanics, Pressure Vessels and Piping Conference, American Society of Mechanical Engineers, Orlando, Florida, June 1982.

White, G.J., and Ayyub, B.M., "Reliability Methods for Ship Structures," American Society of Naval Engineers, ASNE Day, May 1985.

Ayyub, B. M., Applications of Fuzzy Sets, The National Science Foundation Workshop on Civil Engineering Applications of Fuzzy Sets, October 17-19, 1985, Purdue University, West Lafayette, Indiana.

Saadatmanesh, H., Albrecht, P., and Ayyub, B.M., "Analytical and Experimental Study of Prestressed Steel Composite Girders," the Fifth ASCE Structures Congress, New Orleans, Louisiana, 15-18 September 1986.

Ayyub, B.M., and White, G.J., "A Reliability-Conditioned Approach for Calibrating Structural Codes," The Fifth ASCE Structures Congress, New Orleans, Louisiana, 15-18 September, 1986.

Ayyub, B.M., and Kadissi, R., "Conditional Failure and Survival Probability Distributions in Structural Engineering," Chesapeake Bay-Delaware Probability Statistics Day, Department of Mathematics, University of Maryland, Baltimore County, December 1986.

Saadatmanesh, H., Albrecht, P., and Ayyub, B.M., "Behavior of Prestressed Composite Steel-Concrete Beams," American Concrete Institute Annual Convention, Baltimore, Maryland, November 11, 1986.

Schelling, D.R., Albrecht, P., and Ayyub, B.M., "Evaluation of Bridge Structures Subjected to Heavy Loads," Transportation Research Board 66th Annual Meeting, National Research Council, Washington, DC, January 1987.

White, G.J., and Ayyub, B.M., "Reliability-Based Fatigue Design for Ship Structures," American Society of Naval Engineers, ASNE Day, May 1987.

Schelling, D.R., Albrecht, P., and Ayyub, B.M., "Heavy Truck Limits on the National Bridge Inventory," Afternoon Session A: Design, Construction and Evaluation, International Bridge Conference, Engineers' Society of Western Pennsylvania, Pittsburgh, Pennsylvania, June 23, 1987

Ayyub, B.M., "Risk-Based Decision Making in Bridges, Marine Structures and Construction," Panel Presentation, American Society of Mechanical Engineers Third Annual Forum on Risk Analysis , Chicago, December 1988.

Ayyub, B.M., White, G.J., and Purcell, E.S., "Estimation of the Structural Service Life of Boats," American Society of Naval Engineers, ASNE Day, May 1989.

Ayyub, B. M., "Structural Life Expectancy of Ships," Society of Reliability Engineers meeting, ORI, Inc., Crystal City, VA, May 11, 1989.

Ayyub, B. M., Ibrahim, A., and Pressualla, H., "Post-Tensioned Steel Bridges," Poster Session, 1989 National Steel Construction Conference, AISC, Nashville, Tennessee, June 21-24, 1989.

Ayyub, B. M., White, G. J., Bell-Wright, T. F., and Purcell, E. S., "Comparative Structural Life Assessment of Patrol Boat Bottom Plating," ASNE Day, American Society of Naval Engineers, May 2-4, 1990.

Ligomenides, P., Ayyub, B.M., Zimmermann, H.J., and Vamos, T., A Panel on "Management of Uncertainty: Cases, Models and Machines," The First International Symposium on Uncertainty Modeling and Analysis, University of Maryland, College Park, MD, December 3-5, 1990.

Hassan, M.H.M., and Ayyub, B.M., "A Model for Real-Time Control of Construction Activities Using Personal Computers," American Concrete Institute Annual Convention, March 8, 1992, Washington, DC

Ayyub, B.M., and Lai, K.-L., "Structural Reliability Assessment with Ambiguity and Vagueness in Failure," ASNE Day, American Society of Naval Engineers, May 1, 1992, Washington, DC

Dahiyat, E., Hassoun, G., Ayyub, B.M., Aissi, C., Shawar, S., and El-Ekabi, H., A Panel on "Brain Drain," the First Congress of Arab Scientists and Technologists Abroad (ASTS), Amman, Jordan, funded by the National Science Foundation (NSF) and the United Nations Education, Scientific and Cultural Organization (UNESCO) among others, through the University of Illinois at Urbana-Champaign, IL, August 17-19, 1992.

Ayyub, B.M., "Risk-Based Inspection," the Second Congress of Arab Scientists and Technologists Abroad (ASTS), Amman, Jordan, funded by the National Science Foundation (NSF) and the United Nations Education, Scientific and Cultural Organization (UNESCO) among others, through the University of Illinois at Urbana-Champaign, IL, July 30 to August 5, 1994.

Ayyub, B.M., Advances in Structural Reliability, the USACE Structural Engineering Conference, invited speaker, August 28 - September 1, 1995.

Ayyub, B.M., “Marine Applications of Risk-based Technologies,” the ASME Workshop on Risk-based Applications for U.S. Coast Guard Operations, December 12-13, 1995, Tysons Corner, VA.

Ayyub, B.M., “Systems Reliability Analysis of Navigation Locks,” the First TSS/ASTA International Conference on Technology Parks and Transfer of Knowledge, the Arab Scientists and Technologists Abroad (ASTS), Tunis, funded by the United Nations Education, Scientific and Cultural Organization (UNESCO) among others, through the University of Illinois at Urbana-Champaign, IL, July 1996.

Ayyub, B.M., “Simulation Methods for Structural Reliability Assessment,” the First TSS/ASTA International Conference on Technology Parks and Transfer of Knowledge, the Arab Scientists and Technologists Abroad (ASTS), Tunis, funded by the United Nations Education, Scientific and Cultural Organization (UNESCO) among others, through the University of Illinois at Urbana-Champaign, IL, July 1996.

Ayyub, B.M., “Risk-Informed Qualification (RIQ) Guidelines of Active Mechanical Equipment,” the ASME Research Committee on Risk Technology, ASME, May 1999.

Ayyub, B.M., “The Development of Risk-Informed Qualification (RIQ) Guidelines of Active Mechanical Equipment,” the ASME Main Committee on the Qualification of Mechanical Equipment, ASME, May 1999.

Ayyub, B. M., "Cost-benefit Analysis of Risk-Informed Design of Piping Systems of Nuclear Plants," in the Risk-Informed Design Coordination Meeting, ASME Code Week, New Orleans, Sheraton Hotel, December 14, 1999.

Ayyub, B.M., “The Development of Risk-based Standards for Skate Parks and Other Active Recreational Activities Parks,” the ASME Research Committee on Risk Technology, ASME, December 2000.

Ayyub, B.M., “Cost-Benefit Analysis of Risk-Informed Design of Structural Systems,” the ASME Research Committee on Risk Technology, ASME, December 2000.

Mattei, N. J., and Ayyub, B.M., “Load and Resistance Factor Design (LRFD) Rules as Performance-Based Design Criteria for Surface Ships,” Shipbuilding Technologies 2000, September 21-22, 2000, Double Tree Hotel, New Orleans, LA.

Ayyub, B.M., “Hierarchical Ignorance Categories and Uncertainty Types in Engineering Systems,” Second International Workshop on Artificial Intelligence and Mathematical Methods in Pavement and Geomechanical Systems, organized by N. O. Attoh-Okine, University of Delaware, Newark, DE, August 2000.

Ayyub, B. M., and Finkelstein, R., “Decide-Now Business Plan,” VA Tech Expo, November 2000.

Ayyub, B. M., and Finkelstein, R., “Decide-Now Business Plan,” CyberCFO, VC Funding January 2001.

Ayyub, B. M., “A Risk-based Compliance Approval Process for PFDs: Model Development,” Personal Flotation Devices Manufacturing Association (PFDMA), U. S. Coast Guard (Office of Boating Safety, Product Assurance Division) Report at 2001 PFDMA Annual Conference, June 2001.

Ayyub, B. M., “Economic Consequence Assessment of Residential Flood Damage Expert-Opinion Elicitation,” Institute for Water Resources, U.S. Army Corps of Engineers, April 2002.

Ayyub, B. M., “Development of Reliability-Based Load and Resistance Factor Design Methods for Piping,” the ASME Codes Committee and Research Committee on Risk Technology, ASME, May 2002.

Ayyub, B. M., “Development of Reliability-Based Load and Resistance Factor Design Methods for Piping,” the ASME SWG Probabilistic Methods in Design (SG-D) (SCIII), ASME, May 2002.

Ayyub, B. M., “Quality Assurance for Manufacturing Personal Flotation Devices,” Personal Flotation Devices Manufacturing Association (PFDMA), U. S. Coast Guard (Office of Boating Safety, Product Assurance Division) Report at 2002 PFDMA Annual Conference, June 2002.

Ayyub, B. M., “A Risk-based Compliance Approval Process for PFDs: Beta Testing, Calibration, and Data Collection,” Personal Flotation Devices Manufacturing Association (PFDMA), U. S. Coast Guard (Office of Boating Safety, Product Assurance Division) Report at 2002 PFDMA Annual Conference, June 2002.

Ayyub, B. M., “Coastal Storm Damage Relationships Based on Expert Opinion Elicitation,” Institute for Water Resources, U.S. Army Corps of Engineers, June 2002.

Ayyub, B. M., “Development of Probabilistic Design Primary Loads for use in a Weight Optimized Structural Design of CVN(X),” Naval Sea System Command, U. S. Navy, June 2002.

Ayyub, B. M., “Risk-Based Maintenance Management System for Ship Structure,” Naval Sea System Command, U. S. Navy, June 2002.

Ayyub, B. M., “Development of Risk-based Compliance Approval Models of PFDs,” Underwriters Laboratories, U. S. Coast Guard (Office of Boating Safety, Product Assurance Division), Expert Opinion Elicitation, August 2002.

Ayyub, B. M., “Quality Assurance for Manufacturing Personal Flotation Devices,” Underwriters Laboratories, U. S. Coast Guard (Office of Boating Safety, Product Assurance Division), Expert Opinion Elicitation, August 2002.

Ayyub, B. M., “Development of Reliability-Based Load and Resistance Factor Design Methods for Piping,” Invited by the ASME Research Committee on Risk Technology, ASME Special Working Group on Probabilistic Methods in Design, Endorsed by the ASME Codes Committee, Presented at the Office of Research, Nuclear Regulatory Commission, October 31, 2002.

Ayyub, B. M., “Reliability-Based Load and Resistance Factor Design Methods for Class 2 and 3 Piping,” ASME Research Committee on Risk Technology, ASME Special Working Group on Probabilistic Methods in Design, Orlando, FL, December 10, 2002.

Ayyub, B. M., “Failure Modes and Limit States for Class 2 and 3 Piping,” ASME Research Committee on Risk Technology, ASME Special Working Group on Probabilistic Methods in Design, Orlando, FL, December 11, 2002.

Ayyub, B. M., “Risk-based Compliance Approval and Equivalency of Personal Flotation Devices,” U. S. Coast Guard, Underwriters Laboratories, Research Triangle Park, NC, December 13, 2002.

Ayyub, B. M., “Risk-based Quality Assurance for Manufacturing Personal Flotation Devices,” U. S. Coast Guard, Underwriters Laboratories, Research Triangle Park, NC, December 13, 2002.

Quoted in Professional Mariner Online, “In the aftermath of Prestige: Can industry spot problem tankers?” by David Tyler, Professional Mariner #70, February/March 2003, Navigator Publishing, 2003.

Al-Fadhala, M. A., and Ayyub, B. M., “Uncertainty-Based Condition Assessment of Existing Structures,” the Third International Workshop on Life-Cycle Cost Analysis and Design of Civil Infrastructure Systems, Lausanne, 24-26, March 2003.

Ayyub, B. M., “Reliability-Based, Weight-Optimized Design of Primary Structural Components of Naval Vessels,” Naval Sea System Command, U. S. Navy, May 2003.

Ayyub, B. M., “Risk-Based Optimal Maintenance Management of Ship Structures,” Naval Sea System Command, U. S. Navy, May 2003.

Ayyub, B. M., “Electric-Current Induced Drowning Accidents,” U. S. Coast Guard, Washington, DC, May 2003.

Ayyub, B. M., “A Risk-based Compliance Approval Models for Personal Flotation Devices,” NBSAC and U. S. Coast Guard Meeting, April 29, 2003.

Ayyub, B. M., “A Risk-based Compliance Approval Models for Personal Flotation Devices,” Personal Flotation Devices Manufacturing Association (PFDMA), U. S. Coast Guard (Office of Boating Safety, Product Assurance Division) Report at 2003 PFDMA Annual Conference, June 2003.

Ayyub, B. M., “Risk-based Quality Assurance for Manufacturing Personal Flotation Devices,” Personal Flotation Devices Manufacturing Association (PFDMA), U. S. Coast Guard (Office of Boating Safety, Product Assurance Division) Report at 2003 PFDMA Annual Conference, June 2003.

Ayyub, B. M., “A Plan for Dynamic Loss-of-Stability Risk Assessment and Risk-based Design of Intact Naval Vessels,” NSWC-CD, U. S. Navy, Washington, DC, July 2003.

Ayyub, B. M., “Risk-based Protection of Critical Assets,” The Office of Domestic Preparedness of the U. S. Department of Justice, and the American Society of Mechanical Engineers, Washington, DC, September 2003.

Ayyub, B. M., and Kendrick, A., “The Effects of Fabrication Tolerances on the Fatigue Performance of Welded Details,” Naval Sea System Command, U. S. Navy, Ship Structure Committee, SR-1428, October 2003.

Ayyub, B. M., “Consequences of Barge Operation in Locks with Deteriorated Walls,” U. S. Army Corps of Engineers, St. Louis District and Waterways Experiment Station, November 2003.

Ayyub, B. M., “Expert Opinion Elicitation: Consequences of Barge Operation in Locks with Deteriorated Walls,” U. S. Army Corps of Engineers, St. Louis District and Waterways Experiment Station, November 2003.

Ayyub, B. M., “Risk-based Protection of Critical Assets,” U. S. Department of Homeland Security, and the American Society of Mechanical Engineers, Washington, DC, December 2, 2003.

Ayyub, B. M., “Consequences of Barge Operation in Locks with Deteriorated Walls,” U. S. Army Corps of Engineers, Waterways Experiment Station, January 21-23, 2004.

Ayyub, B. M., “Portrayal of Information Uncertainty,” U. S. Air Force, Wright-Patterson Air Force Base, February 3, 2004.

Ayyub, B. M., Lead Speakers on Various Aspects of the Development of the “Guidance on Risk Analysis and Management for Critical Asset Protection,” U. S. Department of Homeland Security, ASME Workshop Asset Protection, April 14 to 16, 2004.

Ayyub, B. M., “Reliability-Based, Weight-Optimized Design of Primary Structural Components of Naval Vessels,” U. S. Navy SBIR Forum, Hyatt Regency, Reston, VA, May 3, 2004.

Ayyub, B. M., “Risk-Based Optimal Maintenance Management of Ship Structures (ROMMSS),” U. S. Navy SBIR Forum, Hyatt Regency, Reston, VA, May 4, 2004.

Ayyub, B. M., “Risk Analysis and Management for Critical Asset Protection,” Workshop, U. S. Department of Homeland Security, and the American Society of Mechanical Engineers, Washington, DC, April 2004.

Ayyub, B. M., “Simulation-Based Assessment of the Probability of the Dynamic Capsizing of Naval Vessels,” Independent Review Team of Dynamic Stability of Innovative Designs of Naval Vessels, U. S. Navy, Naval Surface Warfare Center – Carderock Division, May 6, 2004.

Ayyub, B. M., “Risk-Informed Methods for Protecting Nuclear Facilities,” invited panelist on “Critical Asset Protection - Assessing the Nation's Nuclear Facilities" the American Nuclear Society topical meeting Operating Nuclear Facility Safety (2004 ONFS) in conjunction with the ANS Winter Meeting in Washington, DC, November 17, 2004.

Ayyub, B. M., Reliability Analysis of Varistors and Deployable Generators, U. S. Air Force and Radian, Inc., Eglin Air Force Base, FL, January 10, 2005.

Ayyub, B. M., Testing for Reliability of Varistors and Deployable Generators, U. S. Air Force and Radian, Inc., Eglin Air Force Base, FL, January 10, 2005.

Ayyub, B. M., Gupta, A., Assakkaf, I., Shah, N., Kotwicki, P., and Avrithi, K., “Development of Reliability-Based Load and Resistance Factor Design (LRFD) Methods for Piping,” Several Presentations to Committees during Codes Week, Birmingham, AL, February 28 and March 1, 2005.